SANY
STG230C-10S
Motor Grader
A 179 kW motor grader with a 14 ft blade, load-sensing hydraulics and a 16.8 tonne operating weight for road construction and mine road maintenance.
Blade Length
4,270 mm
Engine Power
179 kW
Operating Weight
16.8 t
Built for your operation.
The SANY STG230C-10S combines a Dongfeng Cummins engine rated at 179 kW with a ZF 6WG-200 transmission and a standard 4,270 mm blade. Its 16,800 kg operating weight with front and rear counterweights provides a substantial platform for grading and maintaining working roads.
Load-sensing hydraulics distribute flow to match demand and support simultaneous implement movements. A sealed ROPS/FOPS cab, heating and cooling air conditioning, and a mechanically suspended Grammer seat support operator comfort. Optional mine-type axle equipment and working tools allow the machine to be configured for different site requirements.
Designed for the work ahead.
01
Precise hydraulic control
The load-sensing system distributes flow as required and supports simultaneous handle operation. Control lever effort is below 20 N for responsive, low-effort grading.
02
Matched powertrain
A 179 kW Dongfeng Cummins engine and ZF 6WG-200 transmission provide six forward and three reverse gears. ECO and cruise-control modes support efficient operation.
03
Versatile blade positioning
The standard 14 ft blade rotates through 360°, tilts to ±90° and cuts to a maximum depth of 715 mm. One-touch blade lowering and dead-weight float assist road maintenance.
04
Operator comfort
A sealed hexahedral ROPS/FOPS cab offers broad visibility, 5.8 kW heating and cooling, and a mechanically suspended Grammer seat.
05
Reinforced working components
The reinforced rear axle uses high-strength chain and a NO-SPIN differential lock. The enclosed rolling-disc work mechanism is designed for sand and gravel conditions.
06
Configuration choices
A 12 ft blade, mine-type rear axle, desert air filtration, front dozer blade, front ripper rake and rear ripper are available as optional configurations.
Specifications
SPECIFICATION
VALUE
Operating weight (with front and rear counterweights)
16,800 kg
Engine manufacturer
Dongfeng Cummins
Engine model
6CTAA8.3-C240
Emission standard
Euro II
Rated engine power
179 kW at 2,200 rpm
Peak torque
1,040 Nm
Transmission
ZF 6WG-200
Gears
6 forward / 3 reverse
Standard blade length
4,270 mm (14 ft)
Optional blade length
3,660 mm (12 ft)
Blade height
620 mm
Blade tilt angle
±90°
Blade rotation
360°
Maximum blade lift above ground
505 mm
Maximum cutting depth
715 mm
Blade cutting angle range
27°–77°
Overall dimensions (L × W × H)
9,510 × 2,740 × 3,500 mm
Front-to-rear axle wheelbase
6,650 mm
Middle-to-rear axle wheelbase
1,538 mm
Rear axle ground clearance
410 mm
Forward speeds
6 / 10 / 13 / 21 / 27 / 42 km/h
Reverse speeds
6 / 13 / 27 km/h
Front wheel steering angle
±48°
Front wheel tilt angle
±17°
Articulated steering angle
±25°
Front axle oscillation angle
±16°
Standard tyres
17.5-25 (12PR)
Hydraulic oil tank capacity (maximum)
140 L
Fuel tank capacity (maximum)
400 L
Cab
ROPS/FOPS hexahedral cab
Air conditioning
5.8 kW heating and cooling
Standard rear axle
Reinforced axle with disc brakes, single-row slewing bearing and high-strength chain
Optional working tools
Front dozer blade, front ripper rake and rear ripper
sany-road-machinery